Semi-auto Pneumatic shielding layer cutting machine

Model:SA-PB3510
Fully cut shielding braid, reserve shielding braid, flip shielding braid, no electricity required.

Only replace the conduit fixture to make one machine compatible with various wires, enabling fast wire stripping.

Product Detail

1.Compatible with various large-dimension coaxial cables, multi-core wires and other types of cables.
2.All working areas of the machine are fully visible.
3.Only matched cutting dies and guide tubes need to be replaced when switching wire specifications.
4.The shielding braid can be fully cut, and the reserved length of shielding braid can be adjusted as required.
5.Optional shielding braid flipping function to achieve damage-free braid turnover.
6.Button start is equipped as standard.
7.Driven by air pressure, no power supply required for safer operation.

Item	Specification / Content
Name	Shielding Mesh Cutting Machine
Model	SA-PB3510
Control Mode	Pneumatic control
Operation Mode	Foot pedal operation
Wire Specification	Shielding mesh outer diameter: 3-16mm
Cutting Length of Shielding Mesh	No margin: 2-110mm; With margin: 2-70mm; Other sizes are available upon request.
Product Changeover	Manual replacement of corresponding fixtures and conduits
Air Source	0.5-0.8 MPa (Please use a stable, clean and dry air supply; inlet air pressure must be no less than 0.5 MPa)
Working Temperature	10 ~ 25℃ (Ambient temperature for machine operation)
Working Humidity	30 ~ 80% RH (Non-condensing)
Overall Dimensions	410mm × 145mm × 155mm (Excluding protrusions)
Weight	Approx. 8 kg