Loose O/U Type Insulated Terminal Wire Stripping and Crimping Machine

Short Description:

Model : SA-YJ06

Description: This model is specially designed for O-type and U-shaped cold pressed terminal customization, suitable for processing wire harnesses ranging from 0.5 to 6.0mm2.

Send email to us

Product Detail

Product Tags

Product Video

Product Introduction

SA-YJ06

This model is specially designed for O-type and U-shaped cold pressed terminal customization, suitable for processing wire harnesses ranging from 0.5 to 6.0mm2. When the wire is inserted, it automatically triggers the start, achieving automatic stripping, twisting, terminal threading, and crimping integrated automatic operation; The whole machine has a closed appearance and a visible window for easy operation; The terminals are fed by a vibrating disc and can be used interchangeably. The crimping tool can be replaced according to different square specifications, and servo crimping, servo twisting, motor stripping, and electric wire clamps are convenient and fast; Diversified combination of pneumatic and electric; HMI touch screen operation, electrically adjustable penetration distance, saved set parameters, and can be directly called.

Features:

1. Mainly electric powered, with diverse combinations of gas and dynamic.

2. The overall enclosed design features a visual front operating position, making it easy to observe and operate accurately.

3. The machine has strong flexibility in action, compact mechanical mechanism, precision, refinement, and optimization, and safe operation.

4. Automatic trigger start or foot switch, fast and convenient.

5. The advantages of high production efficiency and reduced production defect rate.

Machine parameter

Name	Servo Crimping Machine for Cold-Pressed Terminals
Model	SA-YJ06
Control Mode	Adopts HMI and electrical control; mainly electric drive with pneumatic coordination to realize integrated electro-pneumatic control.
Operation Modes	Auto running triggered by wire feeding sensor and manual trigger operation; foot pedal start switch can be optionally installed.
Applicable Wire Specifications	Applicable BVR and RV wires: 0.3, 0.5, 0.75, 1.0, 1.5, 2.5, 4.0, 6.0 mm²; custom processing available upon customer request
Terminal Specifications	SV spade terminals and easy-to-insert RV ring terminals ranging from 0.5 to 6 mm²; material samples required for confirmation.
Stripping & Wire Insertion	Stripping length: 6–30 mm. Wire insertion depth into plastic housing is motor-adjustable, replacing traditional mechanical limit adjustment.
Stripping Method	Rotary stripping, parallel stripping and rotary wire twisting; forward and reverse rotation are switchable.
Terminal Feeding	Vibratory bowl feeding system, compatible with various terminals via simple adjustment.
Crimp Profile	Standard D-type crimp; custom M-type crimp available. Servo motor driven crimping with freely adjustable crimp height.
Product Replacement	Manually replace corresponding tooling and adjust vibratory bowl; recall saved parameters from control memory directly.
Production Capacity	Approx. 3.0 seconds per terminal in automatic cycle (varies with wire type); approx. 4 seconds per terminal under manual operation (wire dependent).
Detection & Alarm	Terminal presence detection and multiple operational monitoring functions with alarm prompts.
Power Supply	Power supply: Single-phase AC220V/50Hz, 10A; Internal power sources: DC24V, DC30V, AC30V; Total power: 1500W.
Air Source	Air supply: 0.5–0.6 MPa (stable, clean and dry compressed air required).
Operating Temperature & Humidity	Ambient operating temperature: 0–35°C; Relative humidity: 30–80% RH (condensation prohibited).
Dimensions & Weight	Dimensions (excluding protrusions): W450 mm × D550 mm × H425 mm; Approx. net weight: 59 KG.