SUZHOU SANAO ELECTRONICS CO.,LTD.

English
Automatic wire cable cutting and stripping machine 0.1-6mm2 Featured Image
  • Automatic wire cable cutting and stripping machine 0.1-6mm2
  • Automatic wire cable cutting and stripping machine 0.1-6mm2

Automatic wire cable cutting and stripping machine 0.1-6mm2

Short Description:

SA-8200C-6  is a Small Automatic Cable Cutting and Stripping Machine for Wire(0.1-6mm2) .


  • :

    • Product Detail

    Product Tags

    Product Video

    Product Introduction

    Automatic cable cutting and stripping machine

    SA-8200C-6

    Processing wire range: 0.1-6mm², SA-8200C-6 is a small Automatic cable stripping machine for wire,It’s adopted Four wheel feeding and English display that it’s more Easier to operate than the keypad model.Widely used in wire harness,Suitable for cutting and stripping electronic wires,PVC cables, Teflon cables, Silicone cables, glass fiber cables etc.

    The machine is fully electric, and the stripping and cutting action are driven by stepping motor,not need additional air supply . However, we considering that the waste insulation may fall onto the blade and affect the working accuracy. So we think It is necessary to add an air blowing function next to the blades, which can automatically clean the blades’s waste when connected to the air supply,This greatly improves the stripping effect.

     

    Advantage

    1. English Color Screen: Easy to operate , Directly setting cutting length and stripping length .
    2. High speed :Two cable processed at the same time;It’s Greatly Improved stripping speed and save labor cost .
    3. Motor: Copper core stepper motor with high precision, low noise and longer service life.
    4. Four-wheel driving: Machine is equipped with two sets of wheels as standard, rubber wheels and iron wheels. The rubber wheels can’t damage the wire, and the iron wheels are more durable.

    Product Parameters

    Model SA-8200C-6
    Product Name  High-speed stripping machine
    Power supply 220V~50-60Hz ( 110V can custom made )
    Operation page 4.3-inch touch screen display
    Capacity About 3000-6000 Pcs (depending on the Cutting length )
    Wire size（one wire version） 0.1-6 mm2
    Stripping length Rear end 0-30mm Front end 0-30mm
    Conduit 3/4/5/6
    Cutting tolerance 0.002*L-MM( No error within 1M)
    Dimension L400mm*W355mm*H285mm (excluding protrusions
    Weight 30kg
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories