SUZHOU SANAO ELECTRONICS CO.,LTD.

English
OEM China Terminal Cross Section Analysis System - Semi-Automatic Cable measure Cutting and Winding machine – Sanao Featured Image
  • OEM China Terminal Cross Section Analysis System - Semi-Automatic Cable measure Cutting and Winding machine – Sanao
  • OEM China Terminal Cross Section Analysis System - Semi-Automatic Cable measure Cutting and Winding machine – Sanao

OEM China Terminal Cross Section Analysis System - Semi-Automatic Cable measure Cutting and Winding machine – Sanao

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We strive for excellence, services the customers", hopes to be the top cooperation team and dominator business for personnel, suppliers and prospects, realizes benefit share and continual promotion for Silicone Tube Cutting Machine , Auto.Labeling Machine With Print Barcodes , Strip Cable Machine , Only for accomplish the good-quality product or service to satisfy customer's demand, all of our products have been strictly inspected before shipment.
OEM China Terminal Cross Section Analysis System - Semi-Automatic Cable measure Cutting and Winding machine – Sanao Detail:

Product Video

Product Introduction

SA-C06 This machine suitable for cable/tube measure cutting and coil machine , Machine coil fixture is custom made via your coil requirement, For example, Coil diameter is 100MM, Coil width is 80 mm, Fixture made via it, Just setting cutting length and coil speed on machine, Then press foot switch, Machine will measure cutting and coil automaticly, It’s Greatly Improved wire process speed and save labor cost.

Advantage

1.Automatically metering, cutting and Coil function.
2. English disply easy to operat it.
3. Use PLC computer programmed touch screen to control metering length and coil width.
4. Can set how many times of tying round the cable coil and winding speed arbitrarily.Low cost and high efficiency.

Products Parameter

Model  SA-C06
Available Wire Size 1-10mm
Outer diameter of finished product 260MM
Cable inner coil diameter non-standard (customizable )
Tying Dia Not have tying function , use our other model is you need .
Power Supply 110/220VAC,50/60Hz
speed winding Max.999 RMP/min ( can be set)
Power Supply 375W
Size 600x400x600
weight 40KG
Product detail pictures:

OEM China Terminal Cross Section Analysis System - Semi-Automatic Cable measure Cutting and Winding machine – Sanao detail pictures

OEM China Terminal Cross Section Analysis System - Semi-Automatic Cable measure Cutting and Winding machine – Sanao detail pictures

Related Product Guide:
Assume full obligation to meet all demands of our customers; accomplish ongoing advancements by promoting the advancement of our customers; become the final permanent cooperative partner of clientele and maximize the interests of shoppers for OEM China Terminal Cross Section Analysis System - Semi-Automatic Cable measure Cutting and Winding machine – Sanao , The product will supply to all over the world, such as: Thailand , Holland , Suriname , We always insist on the management tenet of "Quality is first, Technology is basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
    • This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
    5 Stars By Erin from Colombia - 2017.10.25 15:53
    This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 Stars By Kevin Ellyson from Nigeria - 2017.06.16 18:23
    Write your message here and send it to us

    Products categories