Fully Automatic Combined Terminals Crimping Machine Heat Shrinkable Tube Insert Machine

Short Description:

SA-RS2300-1 This is Automatic 2 wire 3 terminal Crimping and shrinking tube Insertion heating Machine.

Send email to us

Product Detail

Product Tags

Product Video

Product Introduction

SA-RS2300

There are 2 sets of feeding wire parts and 3 crimping terminal stations on the machine After the wire is cut and stripped, the shrinkingtube is inserted into the wire first, and the shrinking tube is automatically pushed onto the terminal after the crimping of the terminal is completed.Therefore, it supports the combination of two wires with different wire diameters to crimp three different terminals. After cutting and stripping the wires, one end of the two wires can be combined and crimped into one terminal, and the other two ends of the wires can also be crimping to different terminals, The machine has a built-in rotation mechanism, and the two wires can be rotated 90 degrees after they are combined, so they can be crimped side by side, or stackedup and down.

The whole machine adopts the concept of modular flexible design, one machine can easily process many different products, and each functional module can be opened or closed freely in the program,Machine Main parts brand Taiwan HIWIN screw, Taiwan AirTAC cylinder, leadshine servo motor ( China brand ) , Taiwan HIWIN slide rail, Japanese imported bearings.This is a high quality machine.

Colour touch screen operation interface, parameter setting is intuitive and easy to understand. The machine has a programmes saving function, which is convenient to use directly next time without setting the machine again, simplifying the operation process.

Advantage
1: Different terminals only need to replace the applicator, This is easy to operate,and multi-purpose machine.
2: Advanced software and English colour LCD touch screen make it easy to operate. All parameters can be directly set on our machine
3: The machine has a programmes saving function,simplifying the operation process.
4 .AdoptingServo terminal machine, the machine quality is more stable and reliable.
5: Machines can be customised according to customer requirements, welcome to inquire!

Machine parameter

Model	SA-RS2300-1( 2 wire 3 terminal + 1 end with shrinking tube )
	SA-RS2300-2 ( 2 wire 3 terminal + 2 end with shrinking tube )
	SA-RS2300-3 ( 2 wire 3 terminal + 3 end with shrinking tube )
The range of processable wires	AWG#26-AWG#14
Cutting length	80mm-9999mm (set value: 0.1mm unit)
Peeling length	1-10mm
Crimping force	2.0 T - 3.0 T
Applicable mold	Horizontal terminal clamping mold/vertical terminal clamping mold
Detection device	Air pressure detection, presence of wires detection, presence of crimped terminals detection, wire knotting detection, pressure monitoring (optional)
Function	Single-wire single-end crimping, single-wire double-end crimping, double-wire parallel crimping, double-wire single-end crimping, single-end hot sleeve threading, with automatic setting of cut depth and automatic setting of terminal crimping position
Efficiency	Double-wire three-piece lamination single-threading heat shrink tubing: 1100-1400 pieces per hour; double-wire three-piece lamination: 2900 pieces per hour (depending on the terminal of the wire); single-wire double-end lamination: 3200 pieces per hour; single-end lamination: 3200 pieces per hour (in continuous operation without stopping)
Compressed air	0.5 MPa to 0.8 MPa (170 N/min)
Mechanical dimensions	Length: 1970Wx Width: 820x height: 1800(mm)
Brand of main components	Taiwan HIWIN /TBI/ Fulei lead screws, Taiwan Airtac cylinder solenoid valves, Lesai/Huichuan servo motors, Fulei slide rails, Japanese imported bearings.
Power supply	Single-phase AC220V50/60Hz 10A